Vertical grinding machine is based on the extensive use of domestic and foreign advanced technology, combined with many years of experience in the production of various vertical grinding machine, the design and development of advanced grinding equipment. Is a set of crushing, drying, grinding, grading transport in one of the grinding industry ideal equipment. It can be widely used in cement, electric power, metallurgy, chemical industry, non-metallic ore and other industries. Used for grinding bulk, granular and powder raw materials into required powder materials.

First of all, let's understand the advantages of vertical grinding machine:

1. Low investment cost

Vertical grinding machine set crushing, drying, grinding, grading transmission in one, the system is simple, compact layout, covering an area of about 50% of the ball grinding system, and can be open air layout, so as to reduce the customer's investment costs.

2. Low operating cost

(1) High grinding efficiency: the grinding roller is used to directly crush and grind materials on the grinding disc, which has low energy consumption and saves 30% ~ 40% energy consumption compared with the ball grinding system.

(2) Less wear: Because the grinding roller is not in direct contact with the grinding disc in the work, and the grinding roller and lining plate are made of high-quality materials, so long service life, less wear.

3. Vertical grinding machine is easy to operate and environmentally friendly

(1) Equipped with automatic control system, remote control can be realized, easy to operate.

(2) It is equipped with a device to prevent direct contact between the roller sleeve and the millstone lining plate, so as to avoid destructive impact and violent vibration.

Because the material stays in the mill for a short time, it is easy to detect and control the particle size and chemical composition of the product, reduce repeated grinding, and stabilize the product quality.

Small vibration, low noise, and the whole equipment is sealed, the system works under negative pressure, no dust spill, the environment is clean, meet the national environmental requirements.

Secondly, small make up for you to list the operation of matters needing attention:

Equipment installation and commissioning process and general requirements

1. Open the box for acceptance

After the arrival of new equipment, the equipment management department, together with the purchasing unit and the using unit (or the receiving unit), shall open the box for acceptance and check whether the equipment is damaged, lost, attached and spare parts in the transportation process. Whether the special tools and technical data are in accordance with the contract. The packing list should be consistent, the equipment unpacking inspection list should be filled in, and the equipment files should be stored. If there is any defect or disqualification, the unit concerned should be dealt with immediately, and claim or claim for compensation.

2. Equipment installation and construction

In accordance with the requirements of equipment process layout drawing, installation construction drawing, foundation drawing, equipment outline size and interspace drawn by the process and technology department, marking and positioning, organize foundation construction and equipment transportation and emplacement. The following factors should be taken into account when designing the technological layout of equipment.