Ramon mill is a very common equipment in the flour industry, after a period of use, there will always be large and small problems, the solution to the problem is the key.

Raymond mill including fan motor heating and bearing temperature is too high different temperature phenomenon, the customer should first figure out the reason of temperature rise, and then can be the right medicine.

1. Check whether the extension pipe is smooth, oil viscosity and grade meet the requirements.

2. The powder bearing of the roller grinding device shall be refuelled in time, cleaned regularly and the oil seal shall be replaced according to the regulations.

3, grinding roller ring bearing to regular oil.

4. The room temperature of the bearing shall not exceed 70℃. If the bearing temperature is too high, remove and clean the bearing and the bearing room and other accessories immediately.

5, fan heating may be caused by high wind pressure, sometimes we will unconsciously encounter the fan equipment in production, so that the wind pressure change of the fan leads to motor heating. It also reminds us not to change the equipment in production.

6. There are also reasons for the equipment itself, such as poor quality, choosing big-brand and high-quality equipment.

Raymond mill in the daily production of a lot of problems are caused by improper maintenance, so it is recommended that we carry out regular maintenance, in order to ensure the extension of the life of the equipment.

The grinding industry is a big industry of powder pollution, so the use of Raymond mill in the production and processing of powder to achieve no dust pollution. And Raymond mill industry development direction of green environmental protection has been advocated by the government, the present situation of resources and the environment requires us to the future ore milling equipment industry go the way of green environmental protection, and realize the green environmental protection, do not need mining enterprises and government departments efforts, also need to society with the cooperation of different departments, such as Raymond mill equipment should have environmental protection, should be set up in the process of mining dust removal facilities, after mining of mining, mineral processing, waste recycling, as well as the pit backfill, the planting of green vegetation, etc.

In order to realize the green and environmentally friendly production mode in the ore grinding industry as soon as possible, attention should be paid to reduce the energy consumption and environmental pollution caused by the ramon grinding equipment while improving the product quality and production efficiency, so as to achieve sustainable development.