Performance characteristics of vertical grinding machine:

1. Milling principle of the material bed. In grinding equipment, some equipment grinding materials depend on internal grinding medium at the material of the machine, some equipment grinding material is through the roller extrusion materials between grinding roller and grinding ring, only vertical grinding machine grinding material is located on the mill by the material grinding, grinding principle and material bed, this kind of material grinding methods of high grinding efficiency, save energy.

2. Hydraulic pressure is adopted to open the grinding roller device, which is convenient for maintenance. There are hydraulic device and pressure device in the vertical mill, which are used to open the roller on both sides of the vertical mill. When pressurizing to the hydraulic pressure, the roller of the vertical mill opens, otherwise it closes. The hydraulic device and the pressure device of the vertical mill can easily open the grinding roller, and the maintenance and replacement of the internal parts of the machine can save labor and time.

3. It can start without load. In some grinders and crushers, they cannot be started without load. This is because the no-load starting will easily cause the collision between the parts inside the machine, which will lead to the damage of the machine. When the vertical mill is started in the milling production, the separator is started first and then the main machine is started. When all the machines are started completely, the crusher in front is started. Therefore, the vertical mill can run at idle for a period of time, which eliminates the trouble of users in starting up.

4, grinding roller can be used in reverse, save the operation cost of the machine. The vertical mill roller near the center of the grinding disc wear faster, and away from the center of the grinding disc wear more slowly, so when the inner wear is serious, can be replaced inside and outside, reuse, save cost.

5, thin oil lubrication more time saving. Vertical mill is the use of thin oil lubrication, users in the machine before the boot only need to add enough oil, save time, labor more worry.